Skip to content

LONDON & SURREY 24/7 & EMERGENCIES 07957 493 040

BOILER REPAIRS

At Temper Heating we undertake repairs on all makes/models of domestic heating boilers and heating systems. The engineers have a wide range of van stock on their vans which always helps to keep our first fix rate high and the cost low to our customers.

At Temper Heating we do not believe in selling you a new boiler when there is always an option to repair the boiler that has served you well. We always recommend regularly servicing your boiler to help prevent these emergencies by identifying any issues before they cause any damage.

If you decide it is uneconomical to repair the boiler, but need assistance or guidance from us to quote you for a new boiler, one of our trusted and skilled engineers will be on hand to help out.

NOISY BOILER

A noisy boiler can create all kinds of sounds from, knocking, vibrating or even a loud banging sound. Have no worries, with one of our trusted highly skilled engineers this will soon no longer be an issue. There’s is never a job we can’t get round.

BOOK REPAIR

LEAKY BOILER

A leaking boiler is something we never want to come home to. It could be down to a faulty part, corrosion or a worn seal. Please don’t try to repair this yourself, please contact us so we can send one our experienced and friendly engineers’ round to diagnose and repair the issue for you.

BOOK REPAIR

BOILER RESET

Does your boiler keep going to lock-out or is the red reset light flashing at you constantly? This is a common issue we come across, don’t hesitate to get in contact with us so we can send one of our experienced engineers round to take care of the issue for you.

BOOK REPAIR

BOILER SERVICING

Book an annual boiler service with Temper Heating to keep your heating working efficiently. You will get the necessary paperwork that will keep your warranty valid. Any parts we replace are also guaranteed for 12 months.

WHY GET A BOILER SERVICE?

EFFICIENCY: A regularly serviced boiler is a more energy efficient boiler.

PEACE OF MIND: An annual service keeps your boiler’s warranty valid.

SAFETY: Your engineer will check everything, including carbon monoxide.

YOUR BOILER SERVICE WILL INCLUDE:

Inspecting your boiler and controls to make sure everything’s safe.
Opening up your boiler to check internal components.
Checking for corrosion and leaks in the boiler.
Giving you a boiler safety checklist plus advice on energy efficiency.
BOOK A SERVICE

WHAT IF MY BOILER NEEDS A REPAIR?

If you are experiencing problems with your boiler, and you need a repair rather than a service, we’ll be happy to advise you. Please get in touch!

BOOK A REPAIR

BOILER & CENTRAL HEATING INSTALLATION

How much it costs to install a heating system is based on a number of factors including: boiler types, fuel, and the size of the central heating system. At Temper Heating we can guide you towards the right option for you.

Did you know that old, inefficient boilers use up much more energy than new A-rated boilers? The savings you make each year will soon add up to cover the initial cost of a new boiler. By replacing an under-performing boiler and installing one that is more energy efficient, you could in fact save up to £475 each year on your heating bills.

REQUEST A QUOTE

It is important to note that not all properties are the same and the cost of installing a central heating system depends on several factors:

The size of the property
The age of a property
The accessibility to connect to Natural Gas, or other fuels such as LPG or Oil
Environmental issues

The total cost of a new central heating system also depends on what is needed for the installation such as:

A complete system may require a new boiler, radiators, and potentially some re-plumbing. item
A specialised system and installation to accompany a property’s specifications.
The cost of labour for a complete or partial installation

TYPES OF BOILERS

COMBI

THE MOST POPULAR IN THE UK
COMBI BOILER PRICES FROM: £1099


BENEFITS:

Provide heat and hot water, on demand
An ideal choice for most homes
Easy to install
No need for separate storage tanks or cylinders; saving on space
Lower energy bills
Efficiency ratings up to 94%

…………………………………………………………………

WHY THIS OPTION MAY NOT BE FOR ME?

A combi system is mainly suitable for homes with 2 or less bathrooms and there is a risk that it may not work well in old homes with older pipework. There needs to be strong mains water pressure in your home for it to work efficiently.

REGULAR

PERFECT FOR BUSY HOMES
REGULAR (HEAT ONLY) PRICES FROM:
£899

BENEFITS:

Low maintenance and can heat larger properties
Delivers lots of consistent hot water choice for most homes
Compact (but will require a separate hot water cylinder and a tank)
If the boiler breaks down, hot water is still available via immersion

…………………………………………………………………

WHY THIS OPTION MAY NOT BE FOR ME?

This system has more components and takes up a lot of space. It can also prove to be more expensive than other systems. Sometimes the water pressure is not as reliable.

SYSTEM

POWERFUL & POPULAR
SYSTEM BOILER PRICES FROM: £999


BENEFITS:

Work alongside a pressurised hot water tank
Do not require a cold storage tank (like regular boilers); space savers
Typically found in larger, modern homes
Can work with solar energy

…………………………………………………………………

WHY THIS OPTION MAY NOT BE FOR ME?

This system may take some time for your water to heat up. The size of your tank will also limit the amount of hot water provided.

HEATING UPGRADES & SMART CONTROLS

What are smart thermostats?

Smart thermostats are a new and clever way to control your heating system by connecting remotely to your internet and installing a simple application on to your smartphone. At their most basic level, smart thermostats will let you set up a schedule for when your heating comes on and turns off, and the temperature.

The clever feature of all smart thermostats is adjusting your heating temperatures with your phone, whether you’re out and about, lounging on the couch or just laying in bed.

Other features vary by thermostat and manufacturer, but most common ones include multi-room temperature control, hot water control, draught detection, safety and holiday modes. These are the perfect upgrade for any system, contact us today to discuss which option may suit you best.

FIND OUT MORE

MAGNACLEAN

What is a MagnaClean?
A MagnaClean is a magnetic filter that is designed to fit onto almost any boiler’s pipework, clearing out debris and sludge before it can build up and block the system or leak into the water supply. Like any filter, MagnaClean stops you from having to flush the systems constantly. This protection lasts throughout the lifetime of the boiler and helps to reduce central heating bills by up to 6%.

Where should a MagnaClean be fitted?
A MagnaClean should be fitted on the return pipe to the boiler, just before it re-enters the boiler. This location ensures that it captures as much debris as possible before the water re-enters the boiler. This will protect the boiler’s internal components from damage and ‘wear and tear’.

Cleaner waterist
Better efficiency
Less maintenance
Fewer Breakdowns
Lower energy bills
Faster Heating
FIND OUT MORE

AIR SOURCE HEAT PUMPS


At Temper Heating we are committed to helping others reduce their carbon footprints by using alternate options to gas and oil.

We are skilled professionals that install heating systems that run off of renewable energy sources. Our years of experience handling air source heat pump installations and allows us to perform onsite surveys to determine where the installation will be best situated, and also gives us the knowledge to answer any questions you might have. We offer to complete a survey at a time that suits you and will talk you through all your options around installing an air source heat pump for your home.

By installing an air source heat pump (ASHP) it will provide you with hot water and heating for your home through absorbing the warmth from the outside air to heat a building. These are high tech and reliable alternatives to using gas an oil energy sources. It may surprise you to learn that it is even possible for air source heat pumps to extract useful heat from air temperatures as low as -15 degrees and still be efficient. ASHPs come in a range of sizes to suit small, medium, or large homes.

If you wish to discuss more about an air source heat pump installation for your home, then you give us a call!

REQUEST A VISIT

LANDLORD GAS CERTIFICATES


The Gas Safety (Installation and Use) Regulations 1998 (GSIUR) outline your duties as a landlord to make sure all gas appliances, fittings, chimneys and flues are safe and working efficiently.

As a landlord, you are responsible for the gas safety of your tenants. You must ensure that all gas appliances are working correctly and safely. Therefore, every rental property that has any sort of gas appliance, whether it be a gas boiler, hob, oven or fire, requires a Gas Safety Certificate. These certificates can only be issued by a technician registered with the Gas Safe Register. At Temper Heating all our engineers are Gas Safe registered.

A Gas Safety Certificate is valid for a year from the date it is issued.

SHOULD ALL OF MY GAS APPLIANCES BE TESTED?

Yes! By Law, all Gas Appliances in a property have to be tested in an inspection, owned by the landlord. You cannot pick and choose which appliances to test, even if you had a new appliance installed within a year.

A gas safety engineer can only certify a gas certificate or deem a property gas safe, if all the appliances in the property have been tested on the day.

SCHEDULE A VISIT
★★★★★

Temper heating are great, very professional and accommodating. I would recommend them highly and very pleased with the service I received.

Jordan S

POWER FLUSH

At Temper Heating we have a wealth of experience with central heating systems, whether it be a new modern system or a 30-year-old system, we will ensure that it is functioning as efficiently as possible.
A Power flush will protect and improve your central heating meaning that you will use less energy and save money. It is the most effective way to remove blockages in your central heating system, allowing water to flow through it freely.

How does it work?
Removing the dirty water

We flush the hot water boiler circuit then start removing all the dirty water and replacing it with clean water. A power flush takes around a day (i.e. 6-8 hrs for 12 radiators), and how long it takes is dependent on the severity of the build-up.

How do you know if I need a power flush?
While it’s not always possible to see the problems caused by blockages, you can tell when your system is heavily contaminated by looking out for the following signs:

Brown or black water when radiators are bled (or no water coming out at all)
Cold strips at the bottom of your radiators
Noisy radiators and/or boiler
Leaking radiators and / or pipework
Your boiler is frequently breaking down / needs to be restarted
Cold radiators but hot pipes
Radiators struggling to heat up and / or some are taking longer to heat up than others

Is Power Flush always the solution?

In some severe cases, it may actually be more cost-effective to replace the system than to carry out a Power flush. A Power flush will not fix broken parts.
If a blockage has caused a part to break that will add time and cost to the job to get the system back to optimum performance. Our engineers will be able to advise you if this is the case.

IMPORTANT: If you are planning to replace your boiler it’s important that the engineer performs a Power flush before the installation. Otherwise, you risk contaminating the new boiler with the old sludge / debris that’s still within the old pipework.

FIND OUT MORE

BEFORE: Cold spots in your radiator are caused by dirty water and sludge which prevents the heat to flow effectively.

DURING: The power flush consists of a chemical clean out of your boiler, pipes and radiators replacing the dirty sludge with clean water.

AFTER: With the dirty sludge water replaced with clean water your radiators and boiler will work much better and more efficiently.